Wireless Security Screen - ZyXEL Communications NWA1120 Series User Manual

Chapter 6 Wireless LAN
Table 16 SSID: Edit (continued)
LABEL
QoS
BSSID VLAN ID
Number of Wireless
Stations Allowed to
Associate
Hidden SSID
Intra-BSS Traffic
Blocking
Enable Layer-2
Isolation
Back
Apply
Cancel

6.6 Wireless Security Screen

Use this screen to choose the security mode for your NWA.
76
DESCRIPTION
Select the Quality of Service priority for this BSS's traffic.
• If you select WMM from the QoS list, the priority of a data packet depends on the
packet's IEEE 802.1q or DSCP header. If a packet has no WMM value assigned to
it, it is assigned the default priority.
• If you select WMM_VOICE, WMM_VIDEO, WMM_BESTEFFORT or
WMM_BACKGROUND, the NWA applies that QoS setting to all of that SSID's
traffic.
• If you select None, the NWA applies no priority to traffic on this SSID.
Note: When you configure an SSID profile's QoS settings, the NWA applies the same
QoS setting to all of the profile's traffic.
Enter a VLAN ID for the SSID profile.
Packets coming from the WLAN using this SSID profile are tagged with the VLAN ID
number by the NWA.
Use this field to set a maximum number of wireless stations that may connect to the
device.
If you do not select the checkbox, the NWA broadcasts this SSID (a wireless client
scanning for an AP will find this SSID). Alternatively, if you select the checkbox, the
NWA hides this SSID (a wireless client scanning for an AP will not find this SSID).
Select this to prevent wireless clients in this profile's BSS from communicating with
one another.
Select this to enable layer-2 isolation for this profile. Wireless clients that connect to
the WLAN using this SSID can access only certain pre-defined devices. See
6.8 on page 84.
Intra-BSS traffic blocking is enabled automatically when you enable layer-2 isolation.
Click Back to return to the previous screen.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
Section
NWA1120 Series User's Guide