ZyXEL Communications WAP3205 User Manual page 67

Table 14 Navigation Panel: Access Point Mode
LINK
Wireless
LAN
LAN
MAINTENANCE
General
Password
Time
Firmware
Upgrade
Backup/
Restore
Reset/
Restart
Sys OP
Mode
WAP3205 User's Guide
TAB FUNCTION
General Use this screen to configure general wireless LAN settings.
Security Use this screen to configure wireless security settings.
MAC Filter Use the MAC filter screen to configure the WAP3205 to
block access to devices or block the devices from
accessing the WAP3205.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS Use this screen to add a wireless station using WPS.
Station
Scheduling Use this screen to schedule the times the Wireless LAN is
enabled.
WDS Use this screen to set up Wireless Distribution System
(WDS) on your WAP3205.
IP Use this screen to configure LAN IP address and subnet
mask.
IP Alias Use this screen to have the WAP3205 apply IP alias to
create LAN subnets.
Use this screen to view and change administrative settings
such as system and domain names.
Password Use this screen to change the password of your WAP3205.
Setup
Time Use this screen to change your WAP3205's time and date.
Setting
Use this screen to upload firmware to your WAP3205.
Use this screen to backup and restore the configuration or
reset the factory defaults to your WAP3205.
Restart This screen allows you to reboot the WAP3205 without
turning the power off.
This screen allows you to select whether your device acts
as an access point, wireless client or both at the same
time.
Chapter 6 Access Point Mode
67