Status Screen In Easy Mode - ZyXEL Communications WAP3205 User Manual

Chapter 5 Easy Mode
Table 10 Wireless Security: WPS
LABEL
Register
Exit

5.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the
WAP3205.
Figure 26 Status Screen in Easy Mode
The following table describes the labels in this screen.
Table 11 Status Screen in Easy Mode
ITEM
Name
Time
LAN IP
MAC Address
Firmware Version
58
DESCRIPTION
Create a secure wireless network simply by entering a wireless client's
PIN (Personal Identification Number) in the WAP3205's interface and
pushing this button.
Type the same PIN number generated in the wireless station's utility.
Then click Register to associate to each other and perform the wireless
security information synchronization.
Click Exit to close this screen.
DESCRIPTION
This is the name of the WAP3205 in the network. You can change
this in the Maintenance > General screen in
page 122.
This is the current system date and time.
The date is in YYYY:MM:DD (Year-Month-Day) format. The time is
in HH:MM:SS (Hour:Minutes:Seconds) format.
This is the IP address of the LAN port.
This is the MAC address of the WAP3205.
This shows the firmware version of the WAP3205.
The firmware version format shows the trunk version, model code
and release number.
Section 12.3 on
WAP3205 User's Guide