Option: Installing an External Handset
Option: Installing an External Handset
If you purchased an external handset option with your fax machine, follow these instructions to install it.
1 Using the supplied screw, connect the handset cradle to its base.
2 Position the handset cradle on the left side of the fax machine. No screws are needed to secure
the cradle.
3 Plug one end of the handset cord into the handset. Then plug the other end of the handset cord
into the jack located on the front of the cradle. Place the handset in the cradle.
4 Insert the supplied telephone cord into the jack located on the bottom of the cradle.
5 Feed the telephone cord from the bottom of the cradle through the cable run located on the back
OF1050 Users Guide(96-01-30)