Installation Menus; Manual Tune Menu - Motorola DSR-6403 Operator's Manual

3

Installation Menus

The purpose of the installation menus is to configure the ports and choose settings that remain
fixed over time. This section describes in detail each of the Installation menus, fields, and options
displayed on the LCD panel.
Return to the main top-level menu and then select the Installation menu group.
With the blinking cursor at the upper left, press the ENTER button to return to the main top-level
menu. Press the 4 buttons until the cursor is at the Install label, and press ENTER. The unit
displays the previously-selected sub-menu.

Manual Tune Menu

Use this menu to begin to acquire a DigiCipher II system signal, by selecting a transponder
frequency for one of the eight L-Band inputs. In addition, this menu allows a user to select the
ASI input or GigE input, as an alternative to RF ports 1 through 8.
30
MANUAL TUNE Input Mode Xpndr LFreq
E Port 1 Xpndr 01
MANUAL TUNE Input
E ASI In
MANUAL TUNE Input
E GigE In
To specify an RF input port, see
"RF Input" on page 32.
1430.00
To specify the ASI In as the input port,
see "ASI Input" on page 31.
To specify the GigE In as the input port,
see "GigE Input" on page 31.