Installation Menus; Manual Tune Menu - Motorola DSR-4530 Operator's Manual

3

Installation Menus

Manual Tune Menu

16
The purpose of the installation menus is to configure the ports and choose settings
that remain fixed over a period of time. These settings include video output format,
audio output format, Ethernet port addresses, and bypass mode operation. This
section describes in detail each of the installation menus, fields, and options
displayed on the LCD panel.
Return to the main top-level menu and then select the applicable menu group.
With the blinking cursor at the upper left, press ENTER button to return to the main
top-level menu. Press the 34 buttons until the cursor is at the Install label, and press
the ENTER button. The DSR-4530 displays the previously selected sub-menu.
Use this menu to initially acquire a DigiCipher II system signal and download
virtual channel tables by selecting a transponder frequency for each of the eight
L-Band inputs, which are labeled Port 1 through Port 8.
MANUAL TUNE
E
MANUAL TUNE
E
In addition, this menu allows a user to select ASI In as the desired signal input to
the DSR-4530.
However, when a port is selected, the user must additionally specify a C-band
transponder or an L-band frequency and modulation format. For more details, see
"Modulation Menu" (described on page 19).
Because many broadcasters use standard North American C-band frequency plans,
you may select a transponder number for these broadcasts. Use the Xpndr option in
the Mode field and the Xpndr (transponder) fields for these.
For offset C-band, a fractional transponder, or Ku-band satellite broadcast, use the
LFreq option in the Mode field and directly enter the L-band frequency. The
DSR-4530 requires no distinction between Ku-band and C-band signals when
selecting the L-band carrier frequency.
Input Mode Xpnr LFreq
Port 0 Xpndr 01 1430.00
Input
ASI In