Status Display Menus; Status0 Menu; Health Field; Alarm Trigger Field - Motorola DSR-6403 Operator's Manual

Status Display Menus

Status display menus provide information regarding the current status of the unit. These fields are
not editable, and the displayed information is either (1) the result of changes in an installation or
channel selection menu, or (2) a parameter the unit reports as part of its operation.

Status0 Menu

Press the  buttons until the Status0 menu appears.

Health Field

This status-only field displays the following status conditions. Press the 4 button until the cursor is at
the Health label, and press ENTER. Use the  buttons to scroll through the following health
indicators. The unit displays the OK or Alarm status of each health indicator.
Acq
Auth
Xcdr
HDD
Video
Fan

Alarm Trigger Field

The Alarm Trigger field is non-editable and displays the alarm trigger condition that is entered in
the Trigger Field in the Alarm Menu (described on page 41).
DSR-6400 Series
STATUS0
Health
E Acq:Alarm
Acquisition indicates whether the unit is locked to the incoming signal
(OK) or not (Alarm).
Authorization indicates whether the unit has authorization (OK) or not
(Alarm) to process all of the selected programs.
Indicates whether the transcoding status of all programs is OK or whether
one or more transcoding processors have detected an alarm condition.
Indicates whether the memory storage device is properly functioning
(OK) or not (Alarm).
Indicates whether the unit is able to render analog composite video (OK)
or not (Alarm).
Indicates whether all fans are operating (OK) or not (Alarm).
Alarm Trigger
Auto
63