Asi Output Rate Menu; Asi1 Field; Asi2 Field - Motorola DSR-6403 Operator's Manual

ASI Output Rate Menu

Press the  buttons until the ASI Output Rate menu appears. Use this menu to designate the
unit's ASI output rate.
Note: The unit has two ASI output ports on the back panel:
ASI OUT 1: The unit passes-through only the input MPEG programs that the unit is processing
(refer to the Channel Menus). In either case, the processed programs are decrypted.
ASI OUT 2: The unit also converts selected input MPEG-4 programs to both an MPEG-2 HD
(High Definition) program and an MPEG-2 SD (Standard Definition) program. These input
programs are selected using the Channel menus.

ASI1 Field

To select the data rate (Mbps) of the ASI OUT 1 on the back panel, press the 4 button until the
cursor is at the ASI1 label, and press ENTER to move into the field. Press the  buttons to
display the options: 19.5, 39, and 78.
Note: The unit formats the ASI OUT 1 on the back panel in either the byte mode or the packet
mode. The unit automatically selects one of the two format modes for the best compatibility with
the devices receiving the ASI output.
Byte Mode
Packet Mode

ASI2 Field

To select the data rate (Mbps) of the ASI OUT 2 on the back panel, press the 4 button until the
cursor is at the ASI2 label, and press ENTER to move into the field. Press the  buttons to
display the options: 27, 54, 81, and 108.
Note: The unit formats the ASI OUT 2 on the back panel in either the byte mode or the packet
mode. The unit automatically selects one of the two format modes for the best compatibility with
the device that is receiving the ASI output.
Byte Mode
Packet Mode
DSR-6400 Series
ASI OUTPUT RATE ASI1
E 78
Default: 78
The unit formats the ASI output in the byte mode when the selected ASI
output data rate is 54 Mbps or less.
The unit formats the ASI output in the packet mode when the selected ASI
output data rate is greater than 54 Mbps.
Default: 27 (DSR-6401); 54 (DSR-6402); 81 (DSR-6403); 108 (DSR-6404)
The unit formats the ASI output in the byte mode when the selected ASI
output data rate is 54 Mbps or less.
The unit formats the ASI output in the packet mode when the selected ASI
output data rate is greater than 54 Mbps.
ASI2
108
43