Status9(Hd) Menu; Pr Field (Dsr-6402, Dsr-6403, And Dsr-6404 Only); Vido Fmt Field; Resolutn Field - Motorola DSR-6403 Operator's Manual

Status9(HD) Menu

This screen displays the video encoding configuration for the transcoded HD program. Press the
 buttons until the Status9 HD menu appears.

PR Field (DSR-6402, DSR-6403, and DSR-6404 only)

The PR (processor) field does not appear on a DSR-6401. Press the 4 button until the cursor is at
the PR label, and press ENTER to move into the field. While ensuring that the cursor remains on
the up/down symbol ( ), press the  buttons to scroll throughout the available processor
values. Press ENTER to confirm the selection and exit the field.
Note: Changing this value will change all other PR fields throughout this unit's menu system to
the same value that is set here.

Vido Fmt Field

The Video field indicates the format of the incoming video, either MPEG-2 or MPEG-4.

Resolutn Field

The Video Resolution field is read-only and indicates the display resolution of the transcoded
video. This is represented as the number of distinct pixels in the horizontal dimension and the
number of scan lines.
Note: The Video Resolution field does not include a designation for (p) progressive or
(i) interlaced to denote the scan type for the HD video.

BitRt Field

The BitRt (Bit Rate) field indicates the data rate of the transcoded video.

Status10(HD) Menu

This screen displays the audio encoding configuration for the transcoded HD program. Press the
 buttons until the Status10 HD menu appears.
DSR-6400 Series
STATUS9 HD PR Vido Fmt Resolutn
E 1 MPEG-2
 
STATUS10 HD PR Aud Format Mode
E 1 0
BitRt
1280x720 18.0M
Default: 1
BitR
PSTHRU --- ---
71