Ad Insertion Test Menu; Cue Tone Field; Relay Field - Motorola DSR-6403 Operator's Manual

Dsr-6400 series satellite multiplex receiver/transcoder
Table of Contents

Advertisement

3

Ad Insertion Test Menu

Ad insertion signals are generated by the unit, but controlled by the uplink programmer. Local
cable companies use ad insertion signals to control and to queue the insertion of commercials in
cable headends. There are two ways to provide ad insertion. One is a dedicated digital DTMF
differential output for cue tones. The other way is to use a dedicated contact closure relay. Use the
Ad Insertion Test menu to turn on and off the cue tones and the relays.
CAUTION: During this test, live ad insertion may be interrupted. When turned on, the ad
insertion signals can be sent to the local headed equipment.
Press the  buttons until the Ad Insertion Test menu appears.

Cue Tone Field

Use this field to turn on and off the cue tone test. Press the 4 button until the cursor is at the Cue Tone
label, and press ENTER to move into the field. Press the  buttons to display the two options: On
and Off. If On is selected, the unit generates a DTMF code (0-9*#ABCD) on the cue tone output
ports. This field returns to the default value (Off) when ENTER is pressed to exit the field.

Relay Field

Use the Relay field to individually turn On and Off each of the ad insertion relays located on the unit's
back panel. Press the 4 button until the cursor is at the Relay label and press ENTER to move into the
field. Press the  buttons to display the options. Depending on which DSR-6400-series model is
being used, you will see one or more of the following options: Off, Relay1 On, Relay2 On, and Relay3
On. This field returns to the default value (Off) when ENTER is pressed to exit the field. To add a
fourth relay for a DSR-6404, see "4th Relay Menu (DSR-6404 only)" on page 42.
Note: To review how the back panel cue tone and relay signal connections relate to the unit's
processor paths and the processor fields (PR1, PR2, PR3, and PR4), see Figure 1-2 on page 16.
78
 AD INSERTION TEST
 Cue Tone  Relay
E
Off
Default: Off
Default: Off
Off

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-6402Dsr-6401Dsr-6404

Table of Contents