Table of Contents
Advertisement
INSTALLATION
Warning:
To prevent electrical shock, turn off the electrical power before making electrical connections.
1. Locate the desired mounting location; position housing with PIR detector and camera pointed
generally in the desired direction and mark location.
2. Select hole locations for direct installation or bracket mount installation. Drill pilot holes and
insert plastic anchors into holes after drilling. If wires will be hidden drill a minimum 5/8"
diameter hole for the power and video cables. Open the PIR detector casing by gently pulling
the front and back covers in opposite directions. Pass the motion detector power and contact
wires through the hole in the back of the case.
3. Connect the PIR detector power, N.O and N.C
wires. Also separately connect to the camera
coaxial power and BNC video connectors
(observe polarity for power – connecting
reverse polarity will damage the camera and
void the warranty).
5
Advertisement
Table of Contents
