Overall Programming Dump Report - Olivetti ECR 2400 Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Pr Pr Pr Pr Printing a PLU Range Dump Repor

inting a PLU Range Dump Repor

inting a PLU Range Dump Report t t t t

inting a PLU Range Dump Repor

Proceed as follows to print a PLU range dump report:

1. Turn the PRG key to the PRG position.

2. Define a [Start PLU number] from 001 to 500.

3. Define an [End PLU number] from 001 to 500.

4. Press the [PLU] key.

5. Turn the PRG key to the OFF position to exit the program mode.

NOTE: You can interrupt the PLU range dump report printing at any

time by pressing the [Feed] key.

Example: Print a PLU range dump report from PLU number 002 to

PLU number 020.

Type/Press:

[002] + [020] + [PLU]

Pr Pr Pr Pr Printing a Depar

inting a Depar

inting a Department Range Dump Repor

tment Range Dump Repor

tment Range Dump Report t t t t

tment Range Dump Repor

Proceed as follows to print a department range dump report:

1. Turn the PRG key to the PRG position.

2. Press [88]

3. Define a [start department number] from 01 to 40.

4. Define an [end department number] from 01 to 40.

5. Press the [Amt Tend/TOTAL] key.

6. Turn the PRG key to the OFF position to exit the program mode.

Example: Print a department range dump report from Department

number 01 to Department number 08.

Type/Press:

[8] + [8] + [01] + [08] + [Amt Tend/TOTAL]

Overall Pr

erall Pr

erall Programming Dump Repor

erall Pr

ogramming Dump Repor

ogramming Dump Report t t t t

After programming your cash register to best suit the needs of your

business, you can print a tape record providing information on how the

cash register is programmed.

Pr Pr Pr Pr Printing the Pr

inting the Programming Dump Repor

inting the Pr

ogramming Dump Report t t t t

ogramming Dump Repor

inting the Pr

ogramming Dump Repor

Proceed as follows to print the program tape:

1. Turn the PRG key to the PRG position.

2. Type [999999] and press the [Amt Tend/TOTAL] key.

3. Turn the PRG key to the OFF position to exit the program mode.

On the next page you will find an example of the cash register's