The Keypad; The Control System; The Control Lock - Olivetti ECR 2400 Instructions Manual

21. [Subtotal w/Tax] - Displays the subtotal of a sale with sales tax.
22. [Euro] - When the cash register is in its default Local base cur-
rency, this key is used to program the Euro exchange rate and to
automatically calculate and display the value in Euro of the total
amount of a sale or of a particular amount registered. When the cash
register is programmed to work in the Euro base currency, pressing
this key converts the sales total to the Local currency.
23. [Amt Tend/TOTAL] (Amount Tendered/TOTAL) - Totals exact
cash transactions, computes change and totals check and charge
transactions.
The Contr

The Control System

The Contr ol System ol System ol System
The Contr The Contr ol System
The Contr The Contr The Contr The Contr The Control Loc ol Lock k k k k ol Loc ol Loc ol Loc
The control lock is located on the upper left-hand side of the keypad.
The PRG key must be properly inserted in the Control Lock in order for
you to be able to use the different cash register functions available. The
following figure shows the Control Lock and the different modes which
can be used.
Depending on the desired operation, insert the key in the Control
Lock and turn it to the following positions:
PRG Used to program the cash register according to your
specific needs.
OFF The cash register is turned off and cannot be used.
REG 1 The cash register can perform the standard sales
transactions. In this mode the preset or programmed
header is printed on both the customer receipt and journal
(if loaded). This is also called the Receipt Mode.
REG 2 Same as the REG 1 mode with the only exception that the
preset or programmed header is not printed on the
customer receipt nor journal. This is also called the
Journal Mode.
X Prints the X management report, Cash-in-Drawer report,
PLU report, clerk report, cash declaration and periodical
financial reports.
Z Prints the Z management report and resets totals (except
the grand total) to zero. Prints the PLU report, clerk
report, cash declaration and periodical financial reports.
Contr Control K Contr Contr Contr ol K ol K ol K ol Ke e e e e y y y y y
The following key is provided as well as a set of keys to open the
cash drawer and printer compartment:
PRG The PROGRAM key works in all modes (PRG, OFF,
REG 1, REG 2, X and Z). It is usually used to program
the cash register, access cash register functions and print
X and Z management reports.
6