Installing The Ribbon Cartridge - Olivetti ECR 2400 Instructions Manual

Installing the Ribbon Cartr tr tr tr tridge Installing the Ribbon Car Installing the Ribbon Car
Installing the Ribbon Car Installing the Ribbon Car
Proceed as follows to install the inked ribbon cartridge:
1. Unlock and open the printer compartment.
If dual-ply paper is loaded in the cash register, lift the plastic
journal winder out of the cash register and unwind and free the
journal record from the winder spindle. Then remove the paper tape
from the print mechanism by sliding it backwards towards the rear
of the cash register.
2. Lift the plastic paper guide out of the printer compartment by
pulling it forward and then upward as indicated by the arrows in the
figure.
idge idge
idge idge
3. Press the right-hand side of the cartridge to release it from its
catches and then remove it from its slot.
4. Install the new ribbon cartridge by inserting the inked ribbon into
the slot and then pressing the cartridge downward until it clicks into
place.
11