Programming Manager Passwords - Olivetti ECR 2400 Instructions Manual

Shown below is an example printout of how your cash register is
programmed.
Date
Name
assigned to
DEPT 1
Name
assigned to
DEPT 2
Percent
plus rate
Euro
exchange rate
Time
Pr Pr Pr Pr Programming Manager P ogramming Manager P ogramming Manager P
ogramming Manager P ogramming Manager Passw
You can define two individual manager passwords to prevent
unauthorized access to the machine's programming mode (PRG), Z
Machine number
mode and X mode. One manager password grants access to the PRG
Price linked to
and Z modes, while another grants access to the X mode.
DEPT 1 with
VAT rate
Def Def Defining a PRG and Z Mode Manager P Def Def ining a PRG and Z Mode Manager P ining a PRG and Z Mode Manager Passw ining a PRG and Z Mode Manager P ining a PRG and Z Mode Manager P
Price linked to
DEPT 2 with Proceed as follows to define a manager password that grants access to
VAT rate
the PRG and Z modes:
Department
1. Turn the PRG key to the PRG position.
status
2. Type [111111] and press the [Amt Tend/TOTAL] key. The message
"PRG/Z PASS" appears on the operator display.
3. Type your 4-digit manager password and then press the [Non Tax]
key. Remember that only digits are accepted.
NOTE: If you define a manager password of 0000, the password
security protection feature will not work.
Example: Define manager password 9876 for the PRG and Z modes.
Type/Press:
[111111] + [Amt Tend/TOTAL] + [9876] + [Non Tax]
HDLO,
minus key
Def Def ining an X Mode Manager P ining an X Mode Manager P
Def Defining an X Mode Manager P Def ining an X Mode Manager Passw ining an X Mode Manager P
VAT rate 1, 2,
3 and 4
Proceed as follows to define a manager password that grants access to
the X mode:
Discount rate
1. Turn the PRG key to the PRG position.
Fraction
rounding
2. Type [222222] and press the [Amt Tend/TOTAL] key. The
System options
message "X PASS" appears on the operator display.
programming
condition
3. Type your 4-digit manager password and then press the [Non Tax]
key. Remember that only digits are accepted.
Consecutive
NOTE: If you define a manager password of 0000, the password
receipt number
security protection feature will not work.
asswor or or or ords assw assw ds ds
assw ds ds
asswor or or or ord d d d d assw assw assw
assw asswor or or or ord d d d d assw
assw
30