Quick Start - Olivetti ECR 2400 Instructions Manual

6. Press the [Feed] key and manually feed the paper into the slot until
the paper catches and advances approximately six to ten inches
above the print mechanism.
NOTE: If the paper does not feed properly, check the alignment of the
paper in the slot and/or for the straight edge on the end of the
paper roll.
7. If you are loading dual-ply paper for a journal record, slide the top
edge of the inner ply through the slots on the plastic journal winder
spindle and manually roll the winder toward the rear of the rear of
the cash register to take up slack in the tape. Make sure that the two
wheels on the spindle are positioned towards the right-hand side.
8. Replace the journal winder spindle in the printer compartment (the
two wheels must be positioned towards the right-hand side).
9. Pass the edge of the customer receipt (or the outer ply when using
dual-ply paper) through the receipt window on the compartment
cover.
10. Reposition, close and lock the printer compartment cover.
Quic Quick Star Quic k Start t t t t k Star k Star
Quic Quic k Star
Quick Start is a brief but complete start-up procedure that allows you
to begin using your new cash register as quickly as possible. Carefully
follow the steps listed below:
1. Make sure cash register is plugged into a grounded power outlet.
2. Insert the PRG key into the Control Lock and turn it to the PRG
position.
3. Set the current date in the day/month/year format by typing the
corresponding numeric keys and then pressing [#/ST/NS]. Single
digits must be preceded by a zero. For example, to set August 5,
1998, type [050898] and then press the [#/ST/NS] key to store your
entry. The newly entered date is printed.
If you wish that the date just entered be printed and displayed
in the month/day/year format, type [40] and then press the
[Void] Key.
13