Setting Volume Levels - Comdial LCD Speakerphone User Manual

GCA70258

1.2.4 SETTING VOLUME LEVELS

The volume control on your telephone is a multipurpose control you
can use to set the volume (loudness) of the ringer, the speaker, and the
handset.
• To set the ringer loudness
level,
—While your telephone is on-hook
and idle, PRESS the VOLUME
UP OR VOLUME DOWN button
once for each change in loudness
you desire. The ringer sounds once
for each change as an example of
the current setting
NOTE: If you set the ringer to the OFF position, your telephone
sounds a short ring burst once for each call you receive at your
station.
• To set the speaker and handset loudness levels,
1. PRESS INTERCOM button.
2. PRESS the VOLUME UP OR VOL-
UME DOWN button once for each
change in speaker volume that you
desire.
3. LIFT handset.
4. PRESS the VOLUME UP OR VOL-
UME DOWN button once for each
change in handset volume that you
desire.
Note: When a call ends, the system resets the speaker and hand-
set volume of all future calls to the programmed (default) setting.
For instructions in setting your speakerphone's default volume,
see Volume Control section in the system specific Features chap-
ter.
August, 03
LCD Speakerphone Station User's Guide
.
Comdial
Impact SCS Volume Buttons
Impact Volume Buttons
5