Comdial LCD Speakerphone User Manual page 81

GCA70258
• To use Tracker to transfer a call to a park orbit for retrieval
and transmit the call's park orbit code and caller ID
information (if available),
1. ANSWER call AND SELECT TRANS.
2. DIAL extension number.
3. If the called station does not answer or is busy, SELECT TRACK.
4. HEAR confirmation beep (Tracker page accepted) OR HEAR busy
tone (Tracker page not accepted).
5. PRESS SPEAKER button to end.
• To retrieve a call that you parked using the Tracker option,
1. PRESS HOLD button to scroll your held calls, (display shows PAGE
and extension number of each parked call).
2. PRESS TAP to retrieve the displayed parked call.
• If you receive a parked call message on your Tracker pager,
1. GO to any system station.
2. PRESS INTERCOM.
3. DIAL Tracker pager orbit code (#800 to #899).
4. RETRIEVE call.
• To enable or disable a Tracker pager at your station,
1. PRESS INTERCOM.
2. DIAL #07 to enable, OR DIAL #06 to disable.
3. PRESS SPEAKER to end.
August, 03
LCD Speakerphone Station User's Guide
Comdial 75