Intercom; Using An Intercom Button - Vodavi Starplus STS User Manual

Intercom

Intercom

Using an Intercom Button

To program a Flexible Button as an Intercom Button:
1. Press the SPEED button twice.
2. Press the desired flexible button to program.
3. Dial [645] on the dial pad. A confirmation tone will sound. If
an error was made during entry, an error tone will sound.
When intercom call rings a busy station (w/intercom btn):
1. The calling station receives ringback tone instead of busy
tone. The called station hears muted or reminder ring and
their intercom button LED starts flashing at the incoming
CO line rate. This indicates an incoming intercom call.
2. The called station can place the current CO call on hold by
pressing the HOLD button,
-or-
Place the current intercom call on hold by pressing the
HOLD button. The intercom call is placed on hold on the
available intercom button.
3. The called station then presses the flashing intercom
button to answer incoming intercom call. When answered,
the following message displays on the called station LCD:
Sta XXX can be a programmed station name.
SINGLE LINE TELEPHONE
Not applicable
C A LL F R O M S TA X X X
M M M DD Y Y H H : MM a m
51