Kodak Imagelink 900 User Manual page 55

5-10
F23 Time and Date Display
Allows you to view the current time and date.
NOTE: You cannot change the time or date using this function.
Formatted Time and Date:
9/9/92 9:30AM
• Press the Clear key to return to a normal operating display.
F34 Operator ID
Allows you to display the operator ID number.
Also allows you to change the operator ID number.
FFF.003.002.001
O p erator ID: 0 01
• Enter a new operator ID, up to three (3) digits.
• Press the Enter key.
F37 Scanner Calibration
Allows you to initiate the calibration process required before scanning
documents.
FFF.003.002.001
Feed Calibration Tar g et...
• Feed calibration target.
F38 Scanner End-of-Job
Allows you to signal the host computer that the last document of the job
has been fed into the transport.
FFF.003.002.001
A normal operating display will appear.
Mode 10
Mode 10
Mode 10
A-41069 January 1993