Technical Specifications
This appendix provides router, port, cabling specifications, and power adapters for the Cisco 819
Integrated Services Router (ISRs) and contains the following sections:
•
•
•
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Note
For compliance and safety information, see the Regulatory Compliance and Safety Information
Roadmap that was shipped with the router and
Cisco 800 Series and SOHO Series Routers.
Router Specifications
Table A-1
specified is not supported. For the complete list of SKUs available for each Cisco 819 ISRs, see the
"SKU Information" section on page
Table A-1
Cisco 819 ISR Specifications
Description
Physical Characteristics
Dimensions (H x W x D)
Weight
OL-23125-02
Router Specifications, page A-1
Mean Time Between Failure Ground Benign Environment, page A-5
Supported Power Adapters, page A-6
lists the operational limits of the Cisco 819 ISR. Operating the router outside of the limits
Hardened Design
Specification
(Cisco 819HG and Cisco
819HG-4G ISRs)
1.73 x 7.7 x 8.1 in
(44 x 196 x 206 mm)
3.2 lb (1.5 kg)
A P P E N D I X
Regulatory Compliance and Safety Information for
1-5.
Non-Hardened Design
Specifications
(Cisco 819G and Cisco
819G-4G ISRs)
1.67 x 7.7 x 7.2 in
(42 x 196 x 183 mm)
2.3 lb (1.0 kg)
Cisco 819 Integrated Services Router Hardware Installation Guide
A
Hardened Design Specifications
(C819HGW and C819HWD ISRs)
1.73 x 7.7 x 9.0 in
(44 x 196 x 229 mm)
3.4 lb (1.54 kg)
A-1