Cisco 819 Installation Manual page 53

Chapter 2 Installing the Router
Tip When choosing a location for wall-mounting the router, consider cable limitations and wall structure.
To mount the router on a wall, follow these steps:
Remove the screws on the sides of the routers.
Step 1
Attach the standard brackets to the chassis using the three screws provided for each bracket. (See
Step 2
Figure
Figure 2-4
Install the router to a wall stud using two number-10 wood screws, round- or pan-head, with number-10
Step 3
washers or two number-10 washer-head screws. The screws must be long enough to penetrate at least 1.0
inch (25.4 mm) into the supporting wood or metal wall stud. (See
Note
OL-23125-02
2-4.)
Attaching the Standard Brackets
The orientation of the Cisco 819 ISR products is critical when wall-mounting. The router must
be oriented as shown in Figure 2-5
IO side) to comply with IP41 and safety criteria. No other wall mounting orientation is
supported.
with the left side of the router rotated up (as viewed from the
Cisco 819 Integrated Services Router Hardware Installation Guide
Installing the Router
Figure 2-5.)
2-9