Cisco 819 Installation Manual page 69

Chapter 3 Connecting the Router
To connect the DC power on your Cisco 819 ISR, follow these steps:
Connect the black and white lead wires to a 12 VDC source. The black lead is negative or ground and
Step 1
the white lead is positive. The output cable is 1.3 meters while the input cable is 1 meter in length. (See
Figure 3-5
Adapters" section on page
Figure 3-5
2
1
Figure 3-6
OL-23125-02
and Figure 3-6.). For the complete list of supported power adapters, see the
A-6.
DC Power Supply PWR1-20W-12VDC and PWR1-20W-24VDC
DC Power Supply PWR2-20W-12VDC and PWR2-20W-24VDC
2
1
Cisco 819 Integrated Services Router Hardware Installation Guide
Connecting the DC Adapter
"Supported Power
3
3
3-7