Connecting The Ac Adapter; Connecting The Dc Adapter - Cisco 819 Installation Manual

Connecting the AC Adapter

Connecting the AC Adapter

The device is designed to work with TN power systems. Statement 19
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
the protective device is rated not greater than: 120VAC, 20A U.S (240VAC, 16 to 20A international).
Statement 1005
Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations. Statement 1045
To connect your Cisco 819 ISR to an AC power outlet, follow these steps:
Connect the AC adapter to an AC power outlet.
Step 1
Plug the adapter cord into the router.
Step 2

Connecting the DC Adapter

Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
the protective device is rated not greater than 36 VDC, 5A Statement 1005
This product requires short-circuit (overcurrent) protection, to be provided as part of the building
Warning
installation. Install only in accordance with national and local wiring regulations. Statement 1045
The device is designed to work with TN power systems. Statement 19
Warning
Cisco 819 Integrated Services Router Hardware Installation Guide
3-6
Chapter 3 Connecting the Router
OL-23125-02