Connecting A Terminal Or Pc To The Console Port - Cisco 819 Installation Manual

Connecting a Terminal or PC to the Console Port

Connecting a Terminal or PC to the Console Port

Connect a terminal or PC to the Console port either to configure the software by using the CLI or to
troubleshoot problems with the router.
To connect a terminal or PC to the console port on the router and access the CLI, follow these steps:
Connect the RJ-45 end of a DB-9-to-RJ-45 serial cable to the RJ-45 Console port on the router.
Step 1
Figure 3-3
Figure 3-3
1
Connect the DB-9 end of the DB-9-to-RJ-45 serial cable to the COM port on your laptop or PC.
Step 2
Note
To communicate with the router, start a terminal emulator application.
Step 3
Cisco 819 Integrated Services Router Hardware Installation Guide
3-4
shows the RJ-45 end of the serial cable connected to the Console port on the router.
Connecting a Terminal or PC to the Console Port
RJ-45 connector to the Console Aux port on
the router
Some laptops and PCs do not come with DB-9 serial port connectors and may require a
USB-to-serial port adapter.
1
2
2 DB-9 connector
Chapter 3 Connecting the Router
OL-23125-02