Features Programming Checklist - Omega Excalibur AL-1000-E Owner's Manual

Features Programming Checklist

This checklist helps when programming features. Before
attempting feature programming, please first carefully read
pages 23-24 to become familiar with the programming proce-
dure, and features' descriptions on pages 25-31. Mark each
applicable box with "\" next to the feature to be changed before
entering Features Programming Mode. As each feature is
programmed, change its mark to "X".
Step 1 - Turn the ignition "off", and press the Valet Switch 5
times.
(the system will respond by briefly sounding the siren)
Step 2 - Press the Valet Switch the same number of times as
the feature number.
(the system will acknowledge the Valet Switch entry by
repeating the same number of chirps)
Step 3 - Press the transmitter's "arm/lock" button to turn the
feature"on", or press the "disarm/unlock" button to turn
the feature "off". (turning the feature "on" is indicated by
one siren chirp; turning the feature "off" is indicated by two
siren chirps)
Repeat - Steps 2 and 3 for each feature to be changed
# FEATURE DEFAULT