Omega Excalibur AL-1000-E Owner's Manual page 38

3) Press and release the ":" button; each press of the button changes the vehicle from Passen-
ger Car, then to Pickup Truck, and then to Van/SUV. When the desired type is flashing, press
and release the "P" button; the Time's "Hours" will flash, and may be set now.
4) Press and release the ":" button to advance the hours, or press and release the " "
button to reverse the hours. When the Hours are correct (please note "AM" or "PM"), press
and release the "P" button. The Time's "Minutes" will flash, and may be set now.
5) Press and release the ":" button to advance the minutes or press and release the " "
button to reverse the minutes. When the minutes are correct press and release the "P"
button. The Echo will play a musical melody; this is the Start Melody which plays upon remote
starting. One of five melodies may be chosen now.
6) Press and release the ":" button. Each press of the button changes to the next melody, note
that the LCD screen displays "S" and a numeral, which is the melody number. When the desired
musical tone has been the last one played press and release the "P" button.
7) The Echo will play another musical melody; this is the Stop Melody which plays when remote
start engine run period ends. There are five different melody choices which can be made. Press
and release the ":" button . Each press of the button changes to the next melody, note that the
LCD screen displays a numeral, which is the melody number. When the desired musical tone has
been the last one played, you may
leave the Echo undisturbed for 12 seconds, until it chirps once
OR
press and release the "P" button to scroll back through the features.
• While the Echo programming must be "scrolled" through, programming mode can be exited at any
Page - 38