Omega Excalibur AL-1000-E Owner's Manual page 36

impact, causing the system to prewarn, the "impact" icon alone will momentarily appear, accompa-
nied by three chirps. If the sensor detects a harder impact or breaking glass, activating the system,
the full hammer and impact icon appears, and the transceiver chips until any button is pressed, and
the icon remains flashing until the ignition switch is turned on.
• The "DOOR" icon will indicate that the system was activated via the door detection circuit. The
transceiver chirps until any button is pressed, and the icon remains flashing until the ignition is
turned on.
• The "start" icon at the rear of the vehicle confirms remote starting. This icon is accompanied by a
musical melody, and stays on while remote starting is operating; during which the puffs will change
to appearing sequentially.
• The "2" within a circle indicates use of the 2nd channel output, which is most commonly used for
a remote trunk release feature.
• The "transmitting tower" icon is an in-range indicator. It is present if the last transmission from the
transceiver was answered by a return signal from the system. Should the transceiver be operated,
and no return signal is received, this icon will disappear.
• The various lines at the upper rear of the vehicle graphic represent a unique Omega feature which
allows the user to customize the vehicle type represented by the display. Options are: passenger car,
pickup truck, and sport utility/van.
Other Omega Echo Notes:
• The system will only transmit a signal to the Echo transceiver if the Echo was last used to operate
the system. Example: if the transmitter is used to arm the system, the system will not transmit a
signal which will cause the Echo to chirp and change its icons.
• If multiple Echo transceivers are programmed to operate the system, the system will send its signal
to only one transceiver- the last one used.
Page - 36