Table of Contents
Advertisement
Quick Links
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
P. O. Box 508
30133
06/08 MO-AL-1810-EDP REV1
Excalibur
AL-1810-EDP
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.
Advertisement
Table of Contents
Related Manuals for Omega Excalibur AL-1810-EDP
Summary of Contents for Omega Excalibur AL-1810-EDP
- Page 1 AL-1810-EDP Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
- Page 2 2 stages, of up to 9 presses each (total of 99 possible combinations) Este producto es fabricado por Omega, un líder en seguridad automotriz desde el año 1971, y esta protegido por uno o mas de los patentes listados. Siempre escojan productos Omega, por que Omega es la “Marca”...
-
Page 3: Table Of Contents
“II” button to program Automatic “Last Door Arming” of the System ...... 8-9 The Excalibur AL-1810-EDP features 4 dedicated remote start output relays, one While the System is Armed, and should it Trigger ....9-10 of which is programmable (this is the unit’s large blue output wire). Operation Prewarning choices are ignition, accessory or starter power output. -
Page 4: Introduction To The System
Excalibur AL-1810-EDP by this feature depends on the correct connection of the safety wire to the vehicle’s Omega Research and Development. To enjoy the most from your new system, parking brake. Please refer to the Installation Instructions manual for proper please take a few moments to learn about the principal user components, and the connection of this wire. - Page 5 Pressing the “arm/lock” and “disarm/unlock” buttons together activates the running after removing the ignition key. After exiting, the user must then arm the remote starting feature of the Excalibur AL-1810-EDP. system, locking the vehicle doors, by pressing the “arm/lock” button. Only after...
-
Page 6: Status Light, Valet Switch, Controller & Transmitter System Versatility - An Important Note
“III” button to program Accessory Output The Excalibur AL-1810-EDP has two multi-use outputs, which can be programmed The “Echo” operation of the AL-1810-EDP is its 2-Way Controller to perform several different functions. The primary function of this output, is to receiving and reacting to signals from the system in the vehicle. -
Page 7: Using The Excalibur System
2- The second method is Last Door Arming, which configures the system to Installer The Excalibur AL-1810-EDP’s 10 Programmable Features automatically arm itself every time you exit the vehicle. This method of arming Doorlocking Functions is programmable, and may be used or not used as desired. -
Page 8: Automatic "Last Door Arming" Of The System
The Excalibur system’s separate “arm/lock” and “disarm/unlock” button Feature #20 Open Door Warning Upon Arming design allows repetitive operation- if already armed, pressing the “arm/lock” press “disarm/unlock” button to program Factory Default Setting button will simply rearm the system, and vice versa when pressing the “disarm/ unlock”... -
Page 9: While The System Is Armed, And Should It Trigger
applications is being used to sound the vehicle’s existing horn. This feature changes must be closed to initiate the Last Door Arming sequence. only the primary audible output, so that it can be utilized to sound the existing To temporarily prevent the system from automatically Last Door Arming, you have horn by itself. -
Page 10: Disarming The System Using The Controller Or Transmitter
is pressed. Which button being pressed has these effects upon the triggered Feature #12 Parking Light Illumination Upon Disarm Excalibur system: Factory Default Setting press “arm/lock” button to program • Pressing “arm/lock” will rearm the system, stopping both system’s alarm press “disarm/unlock”... -
Page 11: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override
press “disarm/unlock” button to program briefly showing the number of operating controllers or transmitters. Chirps Excepting Valet Mode press “II” button to program If the Excalibur was activated and reset itself: The disarming confirmation press “III” button to program Chirps in Valet Mode Only This feature removes the system’s 1 arming and 2 disarming confirmation chirps. -
Page 12: Remote Panic Feature
Step 2 Using the ignition key, turn the vehicle’s ignition switch on. Feature #6 Doors Lock With Ignition On press “arm/lock” button to program Factory Default Setting Step 3 Within 5 seconds press and release the Valet Switch one time. The system Option: press “disarm/unlock”... -
Page 13: Remote Engine Starting
“II” button to program On with doors locking Your Excalibur AL-1810-EDP system offers the ultimate in comfort and “Automatic Rearming”, described on page 11, prevents the system from becoming convenience- remote engine starting. This feature allows the vehicle’s interior to accidentally disarmed by having it arm itself after being disarmed, if a door is not be warmed in the winter or cooled in the summer before you enter the vehicle. - Page 14 safety circuit stops the engine, the “crossed out key” icon will momentarily appear Feature #1 SecureCode (but not if the transceiver’s command stops the engine). Factory Default Setting 1 Press Options: If a safety circuit prevents the starting attempt, the “engine stopped” melody 1 to 9 presses, in each of two stages will play, and the “crossed out key”...
- Page 15 “armed” indication, flashing slowly red, but system’s operations, so the programming and operation of each are described. every fourth flash will be green, indicating that the system is “armed, and The Excalibur AL-1810-EDP’s 23 ready for remote starting”. User Programmable Features...
-
Page 16: Other Controller And Transmitter Operations
Low Battery Automatic Starting Feature: This feature may be used any- To Access a Feature: Step 4 time. Setting this feature to operate has the AL-1810-EDP automatically start the Within 10 seconds, Press & Release the Valet Switch the same num- engine should the vehicle battery voltage drop to 11 volts. -
Page 17: Using The Valet Switch
The 2nd channel output will not operate when the ignition switch is "on" To a large extent the Excalibur AL-1810-EDP’s versatility is due to an incredible unless the vehicle's door is open. If desired, the security system can be programmed... - Page 18 Alarm Valet Mode: This allows you to turn off all of the “alarm” operations of Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. the security system while retaining the remote convenience features such as keyless The siren will briefly sound, confirming that for the next 10 seconds the entry, Panic, and the Auxiliary Outputs.
-
Page 19: Securecode
How to Program Controllers or Transmitters Step 2 Using the ignition key, turn the vehicle’s ignition switch on. The Excalibur AL-1810-EDP system is capable of being operated by as many as four controllers or transmitters; these can be any combination of 1-way Step 3 Within 5 seconds press and release the Valet Switch the same number of transmitters or 2-way controllers. -
Page 20: The Status Light
Should two failed SecureCode attempts be made, the system will ignore any further Anti-Carjacking Protection presses of the Valet Switch for two minutes. The Excalibur is equipped with three separate Anti-Carjacking protection In addition to Emergency Override, if any of the three anti-carjacking features features, whose operation may be selectively activated by the ignition, by an open are utilized, a correct customized SecureCode would also be required to turn off door, or by the transmitter. - Page 21 Start Melody; and Stop Melody These are played with remote starting. violations, the Status Light will show the two most recent violations in the order in Programming these features is a sequential process- the controller is placed into which they occurred. programming mode, then each programmable operation is accessed in turn, and either 9) 2 Red Flashes / Pause = System was triggered by open hood or trunk.
-
Page 22: 2-Way Controller
The 2-Way Controller hammer and impact icon appears, and the controller chips until any button is pressed, and the icon remains flashing until the ignition switch is turned on. The four system- operating buttons are described on pages 5 and 6. This section •...