Table of Contents
Advertisement
Standard Programming: Using this method to program additional or replacement
transmitters does not turn on or otherwise affect the Unauthorized Transmitter Alert
(UTA) feature�
Step 1 Have all transmitters which are to operate the system at hand� Then, turn the
ignition "on"�
Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5 times�
The siren/horn will briefly sound, confirming that for the next 10 seconds the system
is ready to learn a transmitter/controller code� To enter a code, simply press and
release the "lock" button. When the first code is learned all existing stored codes will
be erased�
Step 3 Press the "lock" button on each remaining transmitter one at a time� The sys-
tem will chirp the siren/horn once to confirm that each was learned. The transmitter's
other three button's functions will automatically be assigned when the "lock" button is
learned� If a code is not received within a 10 second period, the learning process will
automatically terminate, as indicated by another siren/horn burst�
If the Unauthorized Transmitter Alert feature is on, programming a transmitter to the
system will activate the "UTA" warning and the extended Status Light indication� For
the next 48 hours, the siren/horn will sound a brief series of chirps every time the
vehicle's ignition key is turned on�
Special Programming procedure to turn On the UTA feature: Using this method
to program transmitters or optional controllers, and to turn on the Unauthorized Trans-
mitter Alert feature�
Follow the same steps as the Standard Programming, but on any transmitter/con-
troller being programmed instead of pressing the "lock" button, press the "lock" and
the "unlock" buttons together� This action turns on the Unauthorized Transmitter
Alert feature and at the same time programs the transmitter or controller to operate
the system�
Once the Unauthorized Transmitter Alert feature is turned on, the warning will
sound for 48 hours after any transmitter programming, including the programming
session which was used to turn it on� This feature can only be turned off again by
sending the system back to Omega for a reset�
Step 1 Turn the ignition key "ON", then "OFF"
Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user
features (10 times to access installer features)�
~ The siren/horn will sound and the status light will turn on�
Step 3 Within 10 seconds of step 2, press the valet switch the number of times cor-
responding with the desired feature's number�
~ The siren/horn will chirp, the status lights, and the parking lights will flash equal
to the selected feature�
Step 4 Change the feature by pressing the transmitter button that corresponds with
the desired setting� The siren/horn will chirp to correspond with the chosen setting�
Programming Controllers/Transmitters
Programming Features
19
Advertisement
Table of Contents
