Figure 32. Installing An Add-In Card Into The Pci Riser Assembly; Figure 33. Installing The Pci Riser Assembly Into The Chassis - Intel Chassis SR1450 User Manual

Hardware Installations and Upgrades
6. Line up the stand-offs on the riser assembly with the slot and the large hole on the riser card.
7. Press and hold the blue riser locking lever. See letter "A" in the figure below.
8. Place riser card onto the stand-offs. See letter "B" in the figure below.
9. Slide the riser card to the right to lock it into place.
10. Release the blue locking lever.

Figure 32. Installing an Add-in Card into the PCI Riser Assembly

11. Install a PCI add-in card, if desired. For instructions, see
12. Position the riser assembly over the PCI sockets on the server board (see letter "A" in the figure
below), lining up the four hooks at the rear of the riser assembly with the four slots in the rear
of the chassis (see letter "B").
13. Push the riser assembly down until the assembly is securely seated.

Figure 33. Installing the PCI Riser Assembly into the Chassis

14. Install the chassis cover. For instructions, see
15. Plug all peripheral devices and the AC power cable(s) back into the server.
®
Intel Server Chassis SR1450 User Guide
"Installing a PCI Add-in Card."
B
A
"Installing the Chassis Cover."
B
TP01618
45