Hardware Installations and Upgrades
5. Place the processor air duct over the processor socket(s). See the figure below. The front edge
of the air duct should contact the fan module and the top of the installed air duct should be flush
with the top surface of the fan module. Use caution not to pinch or disengage cables that may
be near or under the air duct.
6. Install the chassis cover. For instructions, see
7. Plug all peripheral devices and the AC power cable(s) back into the server.
30
Figure 14. Preparing the Processor Air Duct
Figure 15. Installing the Processor Air Duct
"Installing the Chassis Cover."
TP01597
TP01598