Pci Riser Cards And Assembly; Riser Card Options; Figure 31. Pci Riser Bracket And Optional Pci-X And Pci-Express Risers - Intel SR1425BK1 - Entry Server Platform Technical Specifications

Intel® Server Chassis SC1400UP / Intel® Server Platform SR1425BK1-E
5.

PCI Riser Cards and Assembly

The Intel® Server Board SE7221BK1-E provides 1 PCI riser slot (Intel® Adaptive Slot),
supporting full height/full length add-in card risers. The riser slot is capable of supporting risers
that follow either the PCI-X or PCI-Express specifications. The riser assembly for the Server
Chassis SC1400UP consists of a single bracket with three threaded mounting holes. Two on
the long arm of the bracket secure the riser card to the bracket. A third is used to secure the
add-in card to the riser. Tabs on the rear of the riser bracket allow the riser card to safely mate
with the chassis even when no riser card is installed.
Note: Ensure the riser bracket is seated securely in the chassis before applying power as
damage to the baseboard may occur if the metal bracket comes in contact with components.

Figure 31. PCI Riser bracket and optional PCI-X and PCI-Express risers

5.1

Riser Card Options

There are 2 different riser card options offered for use in the Server Chassis SC1400UP.
•
PCI-X – capable of supporting a single full height/full length PCI-X 66/100 MHz card
•
PCI-Express* – capable of supporting a single full height/full length x8 PCI-Express*
add-in card.
Revision 1.0 - 48 -