Figure 21. Installing Floppy Flat Flex Cable To A Floppy Drive; Figure 22. Installing The Floppy Drive Interposer Board - Intel Chassis SR1450 User Manual

Hardware Installations and Upgrades
7. Open the connector on the rear of the floppy drive by pulling up on the connector cover. See
letter "A" in the figure below.
8. Insert one end of the 26-pin floppy drive flat flex cable end into the connector. See letter "B" in
the figure below.
9. Push down on the connector cover to lock the cable into place. See letter "C" in the figure
below.

Figure 21. Installing Floppy Flat Flex Cable to a Floppy Drive

10. Connect the opposite end of the floppy flex cable to the matching connector on the interposer
board. See letter "A" in the figure below.
11. Install floppy interposer board to floppy tray by inserting the left side into the tray slot (See
Letter "B" in the figure below) and securing the other side with a screw (See letter "C" in the
figure below).
12. Install floppy drive into slimline drive bay until it clicks into place.
®
Intel Server Chassis SR1450 User Guide

Figure 22. Installing the Floppy Drive Interposer Board

B
A
C
TP01604
35