Figure 27. Install The Rails Onto The Floppy Drive Conversion Kit Carrier; Figure 28. Installing The Flat Flex Cable To The Floppy Drive - Intel Chassis SR1450 User Manual
Server chassis
Hide thumbs
Also See for Chassis SR1450:
- Technical specifications update (22 pages) ,
- Product brief (6 pages)
Table of Contents
Advertisement
Hardware Installations and Upgrades
10. Reattach the slide rails onto floppy drive conversion kit carrier. See the figure below.
Figure 27. Install the Rails onto the Floppy Drive Conversion Kit Carrier
11. Open the connector on the rear of the floppy drive by pulling up on the connector cover. See
letter "A" in the figure below.
12. Insert one end of the flat flex cable end into the floppy drive connector. See letter "B" in the
figure.
13. Push down on the connector cover to lock the cable into place. See letter "C" in the figure.
A
Figure 28. Installing the Flat Flex Cable to the Floppy Drive
®
Intel
Server Chassis SR1450 User Guide
TP01309
B
C
TP01311
39
Advertisement
Table of Contents
