Figure 30. Installing A Dvd/Cdrom Drive Into The Chassis - Intel Chassis SR1450 User Manual

Hardware Installations and Upgrades
9. Slide the DVD-ROM / CD-ROM drive carrier into the chassis. See letter "A" in the figure
below.
10. Attach the 44-pin CD-ROM drive cable to the exposed side / back of the interposer board. See
letter "B" in the figure below.
11. Connect the loose end of the CD-ROM drive cable to the server board IDE connector. See
letter "C" in the figure below.
12. Connect the longest of the two device power cables coming from the backplane power
connector. See letter "D" in the figure below.
13. Install the chassis cover. For instructions, see
14. (Optional) Install the front bezel. For instructions, see
Bezel."
15. Plug all peripheral devices and the AC power cable(s) back into the server.
42
A

Figure 30. Installing a DVD/CDROM Drive into the Chassis

B
C
D
"Installing the Chassis Cover."
"Removing and Installing the Front
TP01614