Attaching A Hard Drive To A Carrier - Intel SC5000 Subassembly Product Manual

7. Place the drive into the carrier component side down and with the power and data connectors
facing the rear of the carrier. The connectors should be flush with the read of the carrier.
8. Holding the drive in place, turn the carrier upside down.
9. Line up the screws holes in the carrier with the screw holes in the drive.
10. Using four screws of the appropriate size and length, attach the drive to the carrier.
30
C
B
Figure 18. Attaching a Hard Drive to a Carrier
A. Drive carrier
B. Hard drive
C. Screw (6-32 flat head)
Intel SC5000 Server Chassis Subassembly Product Guide
A
OM09069