Adjusting The Built-In Clock; Setting Three Reminders - A&D UA-855 Instruction Manual

Adjusting The Built-in Clock

Adjust the clock prior to use as necessary.
1. Press and hold the Clock button until the year starts blinking.
2. Select the year using the
Press the Clock button to set the current year and
move to month/day selection. The date can be
set anywhere between the years 2006 and 2056.
3. Select the month using the
Press the Clock button to set the current month
and move to day selection.
4. Select the day using the
Press the Clock button to set the current day and
move to hour/minute selection.
5. Select the hour using the
Press the Clock button to set the current hour and
move to minute selection.
6. Select the minute using the
(Press the Clock button to go to the temperature
unit selection mode. For details, refer to page 5.)
Press the START button to set the current minute
and activate the clock.

Setting Three Reminders

This monitor has 3 reminder alarms. You can set
3 different reminder alarms within a 24-hour period.
1. Press and hold the Clock button until the year
starts blinking. Then press the Graph button.
"P-1" is shown at the bottom line of the display.
2. Select the hour using the
Clock button to set the hour and move to minute
selection. Press the
press the Clock button to return to the clock display.
The mark appears on the display.
3. To set the second and third reminders, press the
graph button in the reminder setting mode to
display "P-2" or "P-3". Repeat the above process
to set each reminder.
Using The Monitor
button.
button.
button.
button.
button.
button and press the
button to set the minute and
English 7
Press and
hold
Year
Month
Day
Hour
Minute
Select the unit
Clock
of temperature
Press
and hold
First
buzzer
Second
buzzer
Third
buzzer
Anytime
Anytime