Using The Monitor; Installing / Changing The Batteries; Connecting The Air Hose; Connecting The Ac Adapter - A&D UA-855 Instruction Manual

Installing / Changing The Batteries

1. Slide the battery cover to open it.
2. Remove the used batteries and insert
new batteries
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Slide the battery cover to close it.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device
will not work.
When (LOW BATTERY mark) blinks on the display, replace all batteries
with new ones. Do not mix old and new batteries. It may shorten the
battery life, or cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
The LED of the START button blinks along with
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are
for testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.

Connecting The Air Hose

Insert the air connector plug into
the air socket firmly.

Connecting The AC Adapter

Insert the AC adapter plug into the DC jack.
Then, insert the AC adapter into an electrical outlet.
The AC adapter, the model TB-233, is sold
separately.

Using The Monitor

into the battery
English 6
Air connector plug
AC adapter plug
Step 2
Step 1
Step 3
(LOW BATTERY mark).
Air socket
DC jack