Adjusting The Built-In Clock; Setting Three Reminders - A&D UA-853 Instruction Manual

Adjusting The Built-in Clock

The monitor has a built-in clock. We recommend that you adjust the clock
prior to use.
1. Press and hold the AM button until the digits start blinking.
2. Select the year using the PM button.
Press the AM button to set the current year and
move to month/day selection. The date can be
set anywhere between the years 2006 and 2056.
3. Select the month using the PM button.
Press the AM button to set the current month and
move to day selection.
4. Select the day using the PM button.
Press the AM button to set the current day and
move to hour/minute selection.
5. Select the hour using the PM button.
Press the AM button to set the current hour and
move to minute selection.
6. Select the minute using the PM button.
Press the AM button to set the current minute
and activate the clock.

Setting Three Reminders

This monitor has 3 reminder alarms. You can set
3 different reminder alarms within a 24-hour period.
1. Press and hold the AM button until the digits start
blinking. Then press the MEMORY button.
"P-1" is shown at the middle line of the display.
2. Select the hour using the PM button and press the
AM button to set the hour and move to minute
selection. Press the MEMORY button to complete
the reminder setting after selecting minute.
3. Then the display shows "P-2" and the
for the second reminder. Repeat the above
process if you need a second reminder.
4. A third reminder can be set as well.
Using The Monitor
English 7
Press and hold
the AM button
Year
Month
Day
Hour
Minute
Clock
Press and hold
Press
P M
A M
First
buzzer
Second
buzzer
Third
mark
buzzer
A M
P M
A M
P M
A M
P M
A M
P M
A M
P M
A M
A M
M
M
M
M