Adjusting The Built-In Clock; Setting Three Reminders - A&D UA-787 Plus Instruction Manual

Adjusting The Built-in Clock

The monitor has a built-in clock. We recommend that you adjust the clock
prior to use.
1. Press and hold the CLOCK button until the digits start blinking.
2. Select the year using the START button.
Press the CLOCK button to set the current year
and move to month/day selection. The date can
be set anywhere between the years 2004 and
2053.
3. Select the month using the START button.
Press the CLOCK button to set the current month
and move to day selection.
4. Select the day using the START button.
Press the CLOCK button to set the current day
and move to hour/minute selection.
5. Select the hour using the START button.
Press the CLOCK button to set the current hour
and move to minute selection.
6. Select the minute using the START button.
Press the CLOCK button to set the current
minute and activate the clock.

Setting Three Reminders

This monitor has 3 reminder alarms. You can set
3 different reminder alarms within a 24-hour period.
1. Press and hold the CLOCK button until the digits
start blinking. Then press the MEMEORY button.
"P-1" is shown at the middle line of the display.
2. Select the hour using the START button and press the
CLOCK button to set the hour and move to minute
selection. Press the MEMEORY button to complete
the reminder setting after selecting the minute.
3. Then the display shows "P-2" for the second
reminder. Repeat the above process if you need a
second reminder.
4. A third reminder can be set as well.
Using The Monitor
English 7
CLOCK button
Year
Month / day
Hour / Minute
Clock
CLOCK button
MEMORY
button
First
buzzer
Second
buzzer
Third
buzzer