Route Navigation - Furuno GD-3300 Operator's Manual

In many cases a trip from one place to another involves several course
changes, requiring a series of route points (waypoints) which you
navigate to, one after another. The sequence of waypoints leading to
the ultimate destination is called a route. This unit can automatically
advance to the next waypoint on a route, so you do not have to change
the destination waypoint repeatedly. The figure below shows an ex-
ample of a route between two points, involving six waypoints.
WAYPOINT 01
PORT
FORWARD
PORT
WAYPOINT 06
Figure 5-1 Sample route
You can store 10 routes and a route may contain up to 15 waypoints.
The 3300 automatically assigns a route number from 0-9. Be sure to
record all important routes in a separate log and save them to a memory
card. This unit is not a fail-safe record keeping device.

ROUTE NAVIGATION

ROUTE: 01 (
WAYPOINT 02
REVERSE
PORT/ PORT)
Transit
Waypoint
Order
1 WPT 06
2 WPT 05
3 WPT 04
4 WPT 03
5 WPT 02
6 WPT 01
WAYPOINT 03
WAYPOINT 04
WAYPOINT 05
5-1