Apportioning The Memory - Furuno GD-3300 Operator's Manual

11.10 Apportioning the Memory

11-12
Mark/line memory
When the mark memory becomes full no marks can be entered.
+
1600 pts
2800 pts
New Marks
Current Marks
Figure 11-17 What happens when the mark memory becomes full
and new marks are entered
+
1600 pts
played back
New Marks
1400 pts
Current Marks
Figure 11-18 What happens when the mark memory is full and
marks are added to existing and loaded marks
The default memory apportion is 4,000 points each of tracks and
marks. However, you may change that setting to suit your operating
needs.
If you want the memory apportion to be 5,000 points of track and
3,000 points of marks, for example, follow the procedure below.
Note: All track and marks are erased when the memory is reappor-
tioned.
1. Press the [MENU] key.
2. Press the [7] key to select APPORTION/DELETE MEMORY.
3. Press the [1] key to select APPORTION MEMORY.
Cannot enter
400 points.
400 pts
=
1200 pts
Cannot enter
800 pts.
800 pts
=
1800 pts
800 pts
Marks
1200 pts
2800 pts
800 pts
1800 pts
1400 pts