Furuno GD-3300 Operator's Manual page 38

Setting plot interval 1 by time
The default plot method for plot interval 1 is time. To set plot interval
1 by time do the following:
1. Press the [MENU] key.
2. Press the [8] key to select INITIAL SETTINGS.
3. Select the PLOT INTERVAL 1 field
8 INITIAL SETTINGS
INTERNAL NAV
EXTERNAL NAV
I/O DATA FORMAT
SMOOTHING
PLOT INTERVAL 1
PLOT INTERVAL 2
WAYPOINT MARK
Figure 2-11 INITIAL SETTINGS menu
4. Enter a plot interval. To enter 30 seconds, for example, press [0],
[0], [3] and [0].
5. Press the [ENT] key.
Setting plot interval 2 to "time"
The default plot method for PLOT INTERVAL 2 is distance. How-
ever, it may be set for time as follows:
1. Press the [MENU] key.
2. Press the [8] key to select INITIAL SETTINGS.
3. Select the PLOT INTERVAL 2 field.
4. Select TIME.
5. Enter a plot interval. To enter 15 minutes, for example, press [1],
[5], [0], [0].
6. Press the [ENT] key.
= ON OFF
= GPS LC LA DC DR OFF
= CIF NMEA183 NMEA180/182
= 00 (0-15)
= TIME (00M10S) DIST (0.10NM)
= TIME (00M10S) DIST (0.10NM)
= ON OFF
2-7