Furuno GD-3300 Operator's Manual page 103

11-6
Correcting chart position by latitude and
longitude
You can correct chart position by manually entering latitude and lon-
gitude corrections.
1. Press the [MENU] key followed by the [6] key to display the
CORRECT POSITION screen.
6 CORRECT POSITION
POS CORR = YES
MODE
LATITUDE
LONGITUDE =
SET CORRECT L/L POSITION THROUGH KEYBOARD
AND PRESS ENT TO DISPLAY
PRESS ENT AGAIN TO REGISTER.
Figure 11-8 CORRECT POSITION menu
2. Select YES from the POS CORR field.
3. Select L/L from the MODE field.
4. Enter latitude and longitude corrections in the LATITUDE and
LONGITUDE fields.
5. Press the [ENT] key to display
6. Press the [ENT] key again to register.
Corrections chart position by
Follow the procedure below to correct chart position by Delta L/L.
1. Press the [MENU] key followed by the [6] key to display the
CORRECT POSITION screen.
6 CORRECT POSITION
POS CORR = YES
MODE
DELTA LAT
DELTA LONG =
ENTER L/L CORRECTION VALUE THROUGH KEYBOARD.
Figure 11-9 CORRECT POSITION menu
NO
= CURSOR L/L
= . 'N (
. 'E
L/L.
L/L.
NO
= CURSOR L/L
= . 'N
. 'E
L/L
. 'N)
( . 'E)
+ : N, E : S, W
(Delta) L/L
L/L
+ : N, E : S, W