Furuno GD-3300 Operator's Manual page 34

9-1 EDIT TRACK/MARK
ITEM = CHG TRACK
MODE = CURSOR
COLOR = 1 2 3 4 5 6 7 8 (SAME)
TYPE =
SELECT COLOR AND/OR TYPE. SELECT START AND STOP POINTS
BY USING CURSOR, PRESSING ENT AFTER SETTINGEACH POINT.
PRESS ENT AGAIN TO CHANGE TRACK.
Figure 2-5 EDIT/TRACK MARK menu
2. Select CHG TRACK from the ITEM field.
3. Select method of change from the MODE field.
CURSOR: Select the track to edit with the crosshair cursor.
BOX: Circumscribe the track to edit with the box cursor.
ON SCRN: Edit all track displayed on the screen.
OFF SCRN: Edit track stored in memory.
4. Select the COLOR field.
5. Select new color. Using the above example, press the [2] key.
6. Select the TYPE field.
7. Select track type desired. Using the example, select the dashed
line.
8. For CURSOR or BOX select start point.
9. Press the [ENT] key.
10. For CURSOR or BOX select stop point.
11. Press the [ENT] key.
12. Press the [ENT] key again.
DEL TRACK CHG MARK
BOX ON SCRN OFF SCRN
DEL MARK
2-3