Furuno GD-3300 Operator's Manual page 51

4-4
5. Operate the trackball to place the cursor on position desired.
6. Press the [ENT] key.
7. Press the [WPT] key to finish.
Waypoint entry at own ship's position
1. Press the [WPT] key to display the REGISTER WAYPOINT
menu.
REGISTER WAYPOINT
MODE
WPT NO.
ENTER WAYPOINT NO.
PRESS ENT TO REGISTER WAYPOINT. + : DISPLAY
Figure 4-4 REGISTER WAYPOINT menu
2. Select OS POS from the MODE field.
3. Select WPT NO.
4. Enter waypoint number in two digits.
5. Press the [ENT] key.
6. Press the [WPT] key to finish.
Waypoint entry by range and bearing
This method is useful when you want to enter a waypoint using range
and bearing to a target found on radar.
1. Press the [WPT] key to display the REGISTER WAYPOINT
menu.
2. Select R/B from the MODE field.
REGISTER WAYPOINT
MODE
WPT NO.
RANGE
BEARING
ENTER WAYPOINT NO., RANGE AND BEARING.
PRESS ENT TO DISPLAY WPT L/L.
PRESS ENT AGAIN TO REGISTER WAYPOINT.
+ : N, E, DISPLAY
Figure 4-5 REGISTER WAYPOINT menu
= CURSOR L/L OS POS.
=
= CURSOR L/L OS POS.
=
= NM
= MAG
: S, W, NOT DISPLAY
R/B LIST
: NOT DISPLAY
R/B LIST