Data Transfer; Memory Card Operations; Selecting The Card Slot To Use - Furuno GP-7000F Operator's Manual

9.

DATA TRANSFER

This chapter provides information for saving and replaying data to and from memory
cards, and uploading and downloading data.
9.1

Memory Card Operations

The memory cards store these data: waypoints, routes and track.
9.1.1

Selecting the card slot to use

There are two card slots, upper and lower. Choose the one to use for memory cards
as follows:
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER] knob.
TRACK
ROUTES
WAYPOINTS
MEMORY CARD
TRACK
WAYPOINTS
3. Rotate the [ENTER] knob to choose MEMORY CARD and then push the [ENTER]
knob.
The MEMORY CARD list appears.
Currently
selected slot
4. Rotate the [ENTER] knob to choose CHANGE at the bottom of screen and then
push the [ENTER] knob to change the active slot.
The currently selected slot is shown at the left-hand top corner.
SLOT 1: Upper slot
SLOT 2: Lower slot
11999/12000
12/2000
Plotter menu
NAME
SLOT
1
FILE
1
WPTS
7
QWPTS
0
RTES
2
TRKS
0
SAVE LOAD
Memory card list
Number of tracks and waypoints in use
MEMORY CARD
TYPE DATE
DELETE INITIALIZE
TIME
CHANGE
9-1