NEC Express 5800 User Manual page 87

Installation
NEC ESMPRO Agent is automatically installed together with the installation or re-installation of the
NEC Express5800/ft series. NEC ESMPRO Agent may be installed manually on the master control
menu of NEC EXPRESSBUILDER as follows:
1.
Login to the system with user name "Administrator."
2.
Insert CD-ROM "NEC EXPRESSBUILDER" into the CD-ROM drive.
TIPS:
The CD-ROM drive may be either the drive connected to the system or any drive
located on the network and connected by the LAN Manager. (These are collectively called
CD-ROM drive hereafter) .
IMPORTANT:
drive and then execute MC\1ST.EXE of the drive. Do not start the CD-ROM drive from the
network computer in Explorer.
The autorun function automatically displays the master control menu of NEC
EXPRESSBUILDER.
3.
Click [NEC ESMPRO] in [Setup].
The NEC ESMPRO setup is started to display
the main menu.
4.
Click [Agent] in the main menu of the NEC
ESMPRO setup.
TIPS:
The available menus vary depending on
OS types. (The menus that cannot be installed
are displayed gray.)
IMPORTANT:
Double-clicking to select a menu may display two same dialog boxes. Click the [End]
button to close one of the dialog boxes.
If you click the [Cancel] button during setup, the message asking whether to stop or not to
stop the installation will appear. You can stop the installation by clicking on the [Stop
button (the main menu remains displayed). However, the file having been setup halfway
will not be delete
Procedures after Completion of Installation
To use a CD-ROM drive on the network, assign the network driver to the
d.
4-13
]