3-12 Windows Setup
IMPORTANT:
Do not mount any hard disk into the slots of PCI module for Group2.
If multiple hard disks are mounted, the disk to be the install destination cannot be
determined.
2. Make the PCI module for Group1 primary.
The location of the parts required for operations and check are shown below. (The diagram
shows the rack-mount model. The only difference from the tower model is the orientation.)
BMC status lamp
PCI module status lamp1
PCI module
PCI module
(for Group1)
status lamp2
PCI module
(for Group2)
CD-ROM drives
CPU modules
Rack-mount model
POWER switch